- 6 In Stock
- Product Code:
1 Year Waranty
Included with every single product we sell. Extended waranty up to 10 years on certain items.
We have a comprehensive knowledge of each and every product on the site. Call 0203 5190 888 or email
Unhappy with something? Return it unused within 14 days for a full refund.
Same Day Despatch
Order by 3pm (Mon-Fri) for same day dispatch from our UK warehouse in Northampton.
UK Shipping Options
FreeRoyal Mail 1st Class (1 Day) - £3.50
Courier next working day - £6.00
Courier AM delivery - £9.50
Achieve super-smooth hand held footage with your smartphone (or GoPro camera when used with additional adaptor – sold separately) using this 3 axis gimbal stabiliser. This stabiliser smooths motion on the pan, roll and tilt axes. It uses a six axis MTU sensor to measure the position of the smartphone/camera and 3 silent brushless motors to compensate for any unwanted motion almost instantaneously, removing any visible camera shake.
The unit is very simple to use and far easier than most gimbals to balance. Simply slide your smartphone into the holder, and keep adjusting it left and right until it is evenly balanced and stays level on the roll axis. Next, unscrew the counterweight and adjust it into a position that makes the phone stay level on the tilt axis. The entire balancing process only takes one or two minutes and is very easy to pick up.
After the button on the base is pressed, the gimbal switches on and self-calibrates for 2 seconds, and is then ready to use. When in use it constantly maintains a continuous position on the roll axis, regardless of holding position to keep the horizon straight and level throughout. The gimbal uses an intelligent follow mode on the pan and tilt axes, so that if you make a significant movement, the gimbal will slowly move to your position. This will not occur if a sudden unwanted jerky movement is detected as long as the original holding position is returned to quickly. We have found this mode to be very intuitive and found it very easy to control the camera’s position as desired.
Unlike many of these kinds of stabilisers, all PID software settings are already pre-configured at the factory, which means you never have to plug this unit into a computer. It works flawlessly with any suitably sized smartphone straight out of the box, and requires no tools or assembly.
The smartphone holder will support phones up to 75mm in width and 10mm in thickness. We also now include a free Go-Pro Mount (GOC-01) adaptor for mounting a GoPro camera instead of a smartphone if required.
Update: Now comes supplied with free additional SPH-01+ adaptor and aditional large counterweight to hold and balance larger smartphones up to 92mm in width. Compatible with iPhone 6+.
The high capacity battery is contained in the handle, to keep the weight low to reduce wrist fatigue. The battery life depends on how the stabiliser is used and more movement compensation will drain the battery quicker, although an average run time is around 3 hours on a single charge. You can also see readout of the battery life status from the battery status LEDs on the base. The kit is supplied with a charging cable for the battery. This works by unclipping the battery and sliding it out of the handle. An indicator LED on the mains plug notifies you when the battery is fully charged.
The kit is supplied in a handy zipped hard carry case, making it easy to transport and store. Foam internal padding is specially cut to house the gimbal and included accessories.